Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-00E3

Condition
- Diagnostic trouble code (DTC) SRS-00E3 is stored if the SRS control module does not receive a control area network (CAN) signal with the car model from the central electronic module (CEM).
The diagnostic trouble code (DTC) can only be diagnosed when the ignition is switched on (12 V). In other words, the diagnostic trouble code (DTC) can only be diagnosed when the ignition is switched from position 0 to positions I, II or III.

Substitute value
- None.

Possible source
- Open-circuit in the Controller area network (CAN) cable
- Fault in the central electronic module (CEM).

Fault symptom[s]
- General orange warning lamp lit.