Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-8200

Condition




The engine control module (ECM) checks the power supply from the system relay.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) detects that the voltage from the system relay is below 2.5 V.
The diagnostic trouble code (DTC) can be diagnosed at ignition on or when the engine is running.

Substitute value
- The engine control module (ECM) assumes a voltage of 13.4 V.

Possible source
- Damaged engine control module (ECM).

Fault symptom[s]
- The engine cuts out
- The engine does not start.