Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-431C

Condition




The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the control signal to the heater element (PTC resistor) for the leak diagnostic unit is too high.
The diagnostic trouble code (DTC) can be diagnosed when the engine is running and the control module activates or deactivates preheating for the heater element for the leak diagnostic unit.

Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable
- Damaged leak diagnostic unit.

Fault symptom[s]
- None.