Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-24C0

Condition




The engine control module (ECM) monitors the function of the front heated oxygen sensor (HO2S) (bank 1) by checking its signal. The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers that the heated oxygen sensor (HO2S) only indicates air and no fuel/air mixture.

Substitute value
- Long-term fuel trim is switched off
- Three-way catalytic converter (TWC) diagnostics are disabled.

Possible source
- Incorrectly installed heated oxygen sensor (HO2S)
- Damaged front heated oxygen sensor (HO2S).

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.