Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DEM-0005

Condition




The differential electronic module (DEM) checks if the signal from the control valve is within the permitted range by comparing the signal with a predefined parameter.
The diagnostic trouble code (DTC) is stored if the control module registers a incorrect signal, i.e. a current value outside the predefined parameters.
The diagnostic trouble code (DTC) can be diagnosed with the engine running and the engine speed (RPM) greater than 500 rpm.

Substitute value
- Four wheel drive is disengaged.

Possible source
- Damaged control module.

Fault symptom[s]
- Four wheel drive is not functioning.