Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DDM/PDM-E010

Condition
The diagnostic trouble code (DTC) is generated if the voltage to the driver door/passenger door module (DDM/PDM) differs from the voltage to the central electronic module (CEM) by more than 2 V.
The driver door/passenger door module (DDM/PDM) receives information on voltage to the central electronic module (CEM) via the CAN network.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is on.

Substitute value
- None.

Possible source
- Cable short-circuited to ground.
- Open-circuit on cable.
- Contact resistance.
- Half-blown fuse to driver door/passenger door module (DDM/PDM).

Fault symptom[s]
- Driver door/passenger door switch panel not working.