Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information

Condition
If control unit does not register a signal from Hall sensors H1 and H2 when window-lifting motor is activated, diagnostic trouble code DDM/PDM-0022 is displayed.

Substitute value
- Nothing.

Possible source
- Hall sensors H1 and H2 do not work
- Signal wire for Hall sensors H1 and H2 short circuited
- Open circuit on signal wire for Hall sensors H1 and H2
- Open circuit or short circuit to ground on Hall sensor supply wire or ground.

Fault symptom[s]
- Automatic window closer does not work.