Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F43

Condition




The central electronic module (CEM) checks the windshield wipers.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the signal from the relay circuit for the rear washer motor is too low.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Short-circuit to ground in the relay circuit for the rear washer motor
- Open-circuit in the relay circuit for the rear washer motor.
- Damaged fuse.

Fault symptom[s]
- Rear windshield washing does not work
- The rear windshield washer motor does not operate.