Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F26

Condition
The central electronic module (CEM) checks the windshield wipers.
The diagnostic trouble code (DTC) is stored if the Central electronic module (CEM) detects too high a signal on the output for the windshield wiper low/high speed relay.
The diagnostic trouble codes (DTCs) can be diagnosed when windshield wipers are activated, full speed.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the cable.

Fault symptom[s]
- Windshield wiper does not work