Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F25

Condition




The central electronic module (CEM) checks the windshield wipers.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the signal at the relay coil is too low when the windshield wipers are activated.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Short-circuit to ground in the relay coil.

Fault symptom[s]
- The windshield wipers are not working.