Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F06

Condition




The central electronic module (CEM) checks the signal from the hazard warning signal flasher switch.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that there is no signal from the switch for the hazard warning signal flasher.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Open-circuit in the circuit for the switch for the hazard warning signal flasher.

Fault symptom[s]
- The hazard warning signal flashers are not functioning.