Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8F02

Condition




The central electronic module (CEM) checks the turn signal lamps.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that there is no signal or a low signal in the circuit for the left-hand turn signal lamp.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- Short-circuit to ground in the circuit for the left-hand turn signal lamp
- Open-circuit in the circuit for the left-hand turn signal lamp.

Fault symptom[s]
- The turn signal lamps do not work.