Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-8B01

Condition




The central electronic module (CEM) powers the left-hand parking lamps directly via an output. The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the power consumption for the output is too high.
The diagnostic trouble code (DTC) can be diagnosed at ignition switch position II.

Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable for the parking lamp bulb.

Fault symptom[s]
- The parking lamps do not operate.