Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6F03

Condition




The central electronic module (CEM) checks the signal from the Set- button for the cruise control.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the Set- button has been active for more than 3 minutes.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- The Set- button is jammed in the pressed in position
- Damaged Set- button.

Fault symptom[s]
- Cruise control does not function at all.