Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6F01

Condition




The central electronic module (CEM) checks the signal from the ON/OFF button for the cruise control.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers that the ON/OFF button has been active for more than 3 minutes.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- None.

Possible source
- The ON/OFF button is jammed in the depressed position
- Damaged ON/OFF button.

Fault symptom[s]
- Cruise control does not function at all.