Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-4A33

Condition




The central electronic module (CEM) continuously checks the signal from the sensor on the ejector side which indicates the level in one of the fuel tanks.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers an open-circuit in the connection to the fuel level sensor on the ejector side or a short-circuit to supply voltage in the sensor.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- The fuel level is set to zero.

Possible source
- Open-circuit in the connection to the sensor on the ejector side
- Short-circuit to supply voltage in the sensor on the ejector side.

Fault symptom[s]
- The trip computer displays an empty fuel tank too early.
- The fuel gauge indicates zero even though there is fuel in the tank.