Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-1A06

Condition




The central electronic module (CEM) monitors the cable for 15-supply from the ignition switch.
The diagnostic trouble code (DTC) is stored if the central electronic module (CEM) registers an open-circuit in the cable for 15-supply or a short-circuit to ground in the cable.
The diagnostic trouble code (DTC) can be diagnosed at ignition switch position III (start attempt).

Substitute value
- None.

Possible source
- Open-circuit in the 15-supply cable
- Short-circuit to ground in the 15-supply cable
- Damaged ignition switch.

Fault symptom[s]
- The windshield wipers are not working.
- The starter motor does not turn.