Traffic Message Channel Module (TMC), Replacing

Traffic bulletin module

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off




Ignition off.
Remove the parcel shelf.

Removal

Removing the traffic message channel module (TMC)





Remove:
- the 3 connectors
- 1 M6 nut
- the 1 M6 screw
- the control module.

Installation

Note! For tightening torques, see Specifications. [1][2]Specifications

Installing the traffic message channel module (TMC)

Install:
- the control module
- the 1 M6 screw
- 1 M6 nut
- the 3 connectors
- the parcel shelf.

Finishing

Ordering software
Order applicable software.

Function test
Test the function.