Side Lighting

Side Lighting

Side turn signal flasher

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the bulb holder and lamp housing

NOTE: To replace the bulb, it is only necessary to remove the glass.

Remove:





- the bulb holder
- the lamp housing. Press in the catch. At the same time pull the lamp housing up and out at an angle.

Installation

Installing the bulb holder and lamp housing

Install:
- the lamp housing
- the bulb holder.

Install the cover and mirror glass.