Headlamp Ballast (Xenon)

Headlamp ballast (Xenon)

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Safety precautions

Warning! Always disconnect the ballast connector due to the high voltage.

Removal

Removing the ballast




Detach the front edge of the fender liner.

Remove:
- the 5 screws
- the plastic nut, x 1.
Fold back the front edge of the fender liner.

Remove:
- the screw for the bracket
- the bracket
- the connector.

Installation

Installing the ballast

Install:
- the bracket in the guides
- the screw for the bracket
- the connector
- the fender liner
- the plastic nut, x 1
- the 5 screws.