Convertible Top Rear Panel Side Weatherstrip

Convertible Top Rear Panel Side Weatherstrip

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removing

Removing seal strip, side
Pull loose the seal strip. Start at the top edge of the strip.

Installing




Fasten the butyl tape at (3), part number 1161782.




Apply soapy water on the strip.
Install the seal acc. to the figure.

Removing

Removing seal strip, rear




Remove the nuts, 2 pcs. M8. Tightening torque acc. to: Tightening torque [1][2]Body and Frame.




Remove the pop rivets according to: Removing rivets .

Installing