Tunnel Console Rear

Tunnel console rear

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the rear center console





Remove:
- the rear cup holder as described in Floor Console Cup holder Floor Console Cup Holder
- the rear seat cushion as described in Seat cushion, rear seat Seat Cushion, Rear Seat
- the 3 M6 screws.
Take hold of the rear edge of the center console and pull upward/rearward.

Installation

Installing the rear center console

Note! For tightening torques, see Specifications. [1][2]Body and Frame.

To install, reverse the removal procedure.