Trunk / Liftgate Lock Cylinder: Service and Repair

Liftgate lock cylinder

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the center console
Remove the center console. See Floor console Floor Console.

Removing rivets




Drill out the pop rivet

Removing the lock cylinder




Turn the lock sleeve 1/4 turn counterclockwise and move the housing down (bayonet mounting). Cut the cable to the lock sleeve. Lift the lock cylinder straight up.

Installation

Installing components

Install:
- the lock cylinder
- lock sleeve cable
- the lock sleeve. Turn it 1/4 turn clockwise (bayonet mounting)
- pop rivet
- the center console. See Floor console Floor Console.