Luggage Compartment Hatch Lock

Luggage Compartment Hatch Lock

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the anti-roll bar panel





Remove:
- anti-roll bar panel as described in Rollover Protection Unit Trim Cover
- the connector
- the 3 M6 screws.

Removing screws





Remove the 2 screws.

Installation

Installing the anti-roll bar panel

NOTE: For tightening torques, see Specifications

Install in the reverse order.