Rear Bumper Reinforcement: Service and Repair

Rear bumper rail

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the rear bumper rail





Remove:
- the bumper. See: Cover bumper rear Service and Repair
- the 6 M8 screws of the bumper rail.

Installation

Installing the rear bumper rail
Install the bumper rail with the 6 screws and tighten. See Tightening torque [1][2]Body and Frame.
Rustproof. See: Rustproofing .
Install the bumper. See: Cover bumper rear Service and Repair.