Checking the DVD Player

Checking the DVD player

Fault-tracing information
Fault causes which will stop the data on the display from updating:
- Damaged multimedia module (MMM)
- Problems with the MOST network.

Hint: Check that the MOST network is working before beginning fault-tracing.

Note! Check that no diagnostic trouble codes (DTCs) are stored in the multimedia module (MMM) or the infotainment control module (ICM). Ensure that the other tests have been completed before fault-tracing.

Have all tests been completed and no diagnostic trouble codes (DTCs) are stored?

Yes - Checking the component

No - DONE

-------------------------------------------------

Checking the component




- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the DVD player is working by clicking the VCT2000 symbol. If the DVD player is functioning, OK is displayed.
Try a new DVD player if it is not working.
Remedy as necessary.

Other information
- Control module information and entertainment Control Module Information and Entertainment
- Location of components Location of Components, Multimedia Module (MMM)





Was a fault detected?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------