Connecting the Breakout Box, Phone Module (PHM)

Connecting the breakout box

Special tools:
951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin
951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin
951 1428 Breakout box 951 1428 Breakout Box
951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter

General information
Check that the male and female terminals on the connectors are undamaged and secure (cannot be pressed in). Check that the cables to the female terminals are secured to the terminal pins.
The breakout box is designed to facilitate reading off the control module input and output signals when the control module is connected, and the cable and component resistance when the control module is disconnected. The use of a breakout box reduces the risk of accidentally short-circuiting cables and damaging the connector pins.

Connecting the breakout box
- Ignition off
- Phone Module (PHM) Phone Module (PHM)
- Telephone handset Telephone Handset
- SIM card reader SIM Card Reader
- Switch Volvo On Call Removal and Replacement
Connect breakout box 951 1428 Breakout box 951 1428 Breakout Box to the adapter.

Phone module (PHM)
- Connect adapter 951 1463 Adapter 22-16-14 pin 951 1463 Adapter 22-16-14 Pin to the control module connector A
- Connect adapter 951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter to control module connector B
- For connector A, terminals #A1-#A22 correspond to terminals #1-#22 on the breakout box
- For connector B, terminals #B1-#B6 correspond to terminals #21-#26 on the breakout box.

Handset
- Connect adapter 951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin to the handset connector
- Terminals #1-#5 on the connector correspond to terminals #21-#25 on the breakout box.

SIM card holder
- Connect adapter 951 2888 16-pin AUD adapter 951 2888 16-Pin AUD Adapter to the SIM card holder connector
- Terminals #1-#6 on the connector correspond to terminals #21-#26 on the breakout box.

Switch Volvo On Call
- Connect adapter 951 1508 Adapter 10-7-5 pin 951 1508 Adapter 10-7-5 Pin to the connector for the switches
- Terminals #1-#7 on the connector correspond to terminals #13-#19 on the breakout box.