Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-910C

Condition




If Central electronic module (CEM) receives an error message via CAN-net from Central electronic module (CEM) that indicates a faulty signal from the clutch pedal sensor or malfunction of CAN-communication, the diagnostic trouble code is generated.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
Cruise control switched off.

Possible source
- Fault-trace the central electronic module (CEM).

Fault symptom[s]
- Cruise control does not function at all.