Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CRM-E010

Condition




If the voltage to Convertible Roof Module (CRM) differs by more than 2 V from the voltage to Central Electronic Module (CEM), the diagnostic trouble code is generated.
Convertible Roof Module (CRM) receives information about the voltage to central electronic module (CEM) via the CAN-net.
The diagnostic trouble code (DTC) can be detected in ignition position I or II (not ignition position III).

Substitute value
- None.

Possible source
- Short-circuit to ground.
- Contact resistance.
- Open-circuit in the wiring.
- Half-blown fuse for Convertible Roof Module (CRM).

Fault symptom[s]
- Push button does not work
- Lockable storage doesn't work
- Antenna extension or retraction not working