Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CRM-C072

Condition




The diagnostic trouble code (DTC) is stored if the catch motor does not work.
The diagnostic trouble code (DTC) can be diagnosed in ignition positions 0, I, II and III.

Substitute value
- None.

Possible source
- The catch motor is not working.
- The catches that are controlled by the catch motor are blocked mechanically.
- The catch motor is disconnected.
- Open-circuit on the cable between the catch motor and the Convertible Roof Module (CRM).
- Hall sensor is not functioning.
- Internal error in Convertible Roof Module (CRM).

Fault symptom[s]
- Lockable storage doesn't work
- Message in information display