Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CRM-C032

Condition




If the internal voltage (12 V) is short circuited to ground or overloaded, then the Diagnostic Trouble Code (DTC) is generated.
The diagnostic trouble code (DTC) is only generated when feed voltage for the sensors is on.

Substitute value
- None.

Possible source
- There is a short-circuit to ground in the supply voltage for sensors 15, 16 and 19 or 3, 7, 9, 11, 12 and 13.

Note! The sensors are supplied in groups.

- Internal error in Convertible Roof Module (CRM).

Fault symptom[s]
- None or limited roof manoeuvreing
- Message in information display