Invalid Combination

Invalid combination

Checking diagnostic trouble codes (DTCs)




- Ignition on.
If the malfunction is intermittent, it means that the malfunction has been registered at an earlier time but the malfunction no longer remains. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
Check if the fault is permanent or intermittent.
Click on the VCT2000 symbol to read off the diagnostic trouble codes (DTCs).





Is the fault intermittent?

Yes - Troubleshooting procedure complete

No - Checking the position sensor

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that the control of the roof is working in both directions.

Does operation of the roof work?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information
The fault must be diagnosed and remedied. As this is not the case, the fault-tracing has failed.
Exit fault-tracing or try again.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Checking diagnostic trouble codes (DTCs)

-------------------------------------------------

Checking the position sensor
The malfunction depends either on the position sensor being damaged or incorrectly installed.
- Check the position sensor for wear and function.
- Check installation of the position sensor.
Remedy as necessary.

Other information
- Convertible Top Position Sensor Convertible Top Position Sensor





Was a fault detected?

Yes - Verification

No - Fault-tracing information

-------------------------------------------------