Blocked

Blocked

Checking the fan for the passenger compartment temperature sensor




- Ignition on.
Check using a hand that the fan for the passenger compartment temperature sensor is blowing.
Check that the fan rotates freely and is not blocked by any objects.

Other information:
- For further information about the connectors, fuses and relays, see the relevant section in the Wiring Diagram
- Connecting the breakout box Connecting The Breakout Box, Climate Control Module (CCM)
- Signal specification Signal Description, Climate Control Module (CCM)
- Location of components Component Location, Climate Control Module (CCM)
- Climate control module (CCM) Service and Repair
- Checking wiring and terminals Checking Wiring and Terminals





Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check by feeling with a hand that the fan is blowing.

Is the fan working?

Yes - Troubleshooting procedure complete

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the fan for the passenger compartment temperature sensor

-------------------------------------------------