Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • A/T Controls - TCM Update For Various Concerns
  • Drivetrain - DEM Software Updates
  • Instruments - Fuel Gauge Falsely Shows Full Or 3/4
  • Engine Controls - ECM Update for False Misfire DTC's
  • Antitheft System - No Crank/No Start Condition
  • A/T AW55 - TCM DTC's 010A, 010B, 010C
  • Engine Controls - ECM DTC's 2110/2210
  • Engine Controls - Poor Performance/MAP Sensor DTC's Set
• By Symptom
  • Abnormal wear/deterioration
    • Engine Controls - ECM DTC's 2110/2210
  • Customer Interest
    • A/T Controls - TCM Update For Various Concerns
    • Drivetrain - DEM Software Updates
    • Instruments - Fuel Gauge Falsely Shows Full Or 3/4
    • Engine Controls - ECM Update for False Misfire DTC's
    • Antitheft System - No Crank/No Start Condition
    • A/T AW55 - TCM DTC's 010A, 010B, 010C
    • Engine Controls - ECM DTC's 2110/2210
    • Engine Controls - Poor Performance/MAP Sensor DTC's Set
  • False instrument warning light/gauges
    • Instruments - Fuel Gauge Falsely Shows Full Or 3/4
  • Hard Shifting
    • A/T Controls - TCM Update For Various Concerns
  • Inoperative
    • Starting System - No Crank/No Start Diag. Information
  • No shift/Incorrect gear engagement
    • A/T Controls - TCM Update For Various Concerns
  • Starting problems
    • Starting System - No Crank/No Start Diag. Information
    • Antitheft System - No Crank/No Start Condition
• All Technical Service Bulletins
  • Computers/Controls - Programming And Diagnosis
  • A/T Controls - TCM Update For Various Concerns
  • Computers/Controls - CAN Error Frame Finder Info.
  • Drivetrain - DEM Software Updates
  • Fuel System - Prior Approval/Improved Fault Tracing
  • Fuel System - Improved Fault Tracing/Prior Approval
  • Instruments - Fuel Gauge Falsely Shows Full Or 3/4
  • Body Controls - BCM Diagnostic Information
  • Starting System - No Crank/No Start Diag. Information
  • Computers/Controls - Usage of RELOAD Software
  • Engine Controls - ECM Update for False Misfire DTC's
  • Computers/Controls - CANbus Network Information
  • Computers/Controls - CEM Recovery after SWDL Interrupt
  • Engine Controls - Engine Management Software Usage
  • Antitheft System - No Crank/No Start Condition
  • A/T AW55 - TCM DTC's 010A, 010B, 010C
  • Engine Controls - Software Download Fault Prevention
  • Restraints - SRS Lamp ON/Intermittent Impact Sensor DTC
  • Engine Controls - ECM DTC's 2110/2210
  • Engine Controls - Poor Performance/MAP Sensor DTC's Set
  • Engine Controls - Reuse Of ECM's