Bushing Outer Tie Rod, Replacing

Bushing outer tie rod, replacing
Special tools: 999 7054, 999 7035, 999 7044, 999 7034, 999 7036, 999 7132

Note: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal
Remove the tie rod
Remove the inner mounting of the tie rod.

Removing the bushing

Note: Note the position of the bushing before removal.





Install the hydraulic cylinder.
Use 999 7054 with socket 999 7035, socket 999 7044, connecting rod 999 7034, drift 999 7036 and 999 7132 Pull the bushing out

Installation
Installing the bushing

Note: Pull in the new bushing to the same position as previously noted!

Install the new bushing on the other side of the mounting lug. Pull in the bushing in the same direction as it was pulled out.

Installing tie rod
Install the inner mounting of the tie rod.