Pulley Power Steering Pump, Replacing

Pulley power steering pump, replacing

Special tools:
999 5737 Puller 999 5737 Puller
999 5738 Press tool 999 5738 Press Tool
999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 999 5575 Puller Cylinder Used With Hydraulic Pump -5576
999 5628 Press tool 999 5628 Press Tool

Removing pulley




- Remove the power steering pump. See Power steering pump, replacing Power Steering Pump, Replacing
- Secure the power steering pump in a vise
- Remove the pulley. Use puller 999 5737 Puller 999 5737 Puller.

Installing pulley, alternative 1





Install the pulley. Lubricate the pump shaft with oil
Use press tool 999 5738 Press tool 999 5738 Press Tool.
- Counterhold using B
- Tighten with A.

Installing pulley, alternative 2




- Install the screw on the pump shaft.

Note! Use a screw with the correct thread (M8x75mm).

- Install special tool 999 5628 Press tool 999 5628 Press Tool on compression tool 999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 999 5575 Puller Cylinder Used With Hydraulic Pump -5576
- Lubricate the pump shaft and install the pulley
- Install tool 999 5628
on the pulley
- Hook tool 999 5628 Press tool 999 5628 Press Tool onto the screw for the pump shaft.




- Press in the pulley to the listed measurement
- Install the power steering pump. See Power steering pump, replacing Power Steering Pump, Replacing.