Amplifier: Service and Repair

Amplifier




















Amplifier

Note! This accessory requires software unique to the car.




- Open the right-hand front door
- Slide the right-hand seat back to the rearmost and uppermost position.








- Remove the three retaining screws holding the amplifier
- Lift up the front edge of the amplifier. Pull the amplifier upwards slightly. Disconnect the connectors on the reverse
- Place the amplifier to one side.
- Push the new amplifier down slightly in the recess and connect the connectors
- Position the amplifier. Secure the amplifier using the screws used for the existing amplifier.

- Program the software according to the service information in VIDA.