Activated Too Long. Permanent Fault

Activated too long. Permanent fault

Checking the switch
Check that the switch does not stick in the activated position.
Replace the switch control.
Remedy as necessary

Other information:
- To replace the switch control, see Keypad steering wheel, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD Keypad Steering Wheel, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After the repair it is necessary to check that the fault has been rectified.








- Ignition off.
- Connect connectors, install components, etc.
- Ignition on.
Check that the relevant functions of the switch units work.





Do buttons work?

Yes - Troubleshooting procedure complete

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the switch

-------------------------------------------------