Connecting the Breakout Box. Car Phone Module

Connecting the breakout box

Connecting the breakout box. Car phone module

Special tools:
951 1463
951 1509
951 1428

Connecting the breakout box

- Ignition off
- Expose the car phone module according to Phone module (PHM), replacing.

Check that the male and female terminals on the unit connectors are undamaged and secure (cannot be pressed in). Check that the cables to the female terminals are secured to the terminal pins.

Connect adapter 951 1463 (terminal A, C) or 951 1509 (terminal D) to the connector for the unit (to the wiring). Connect breakout box 951 1428 to the adapter.
Car phone module terminals:
Terminals #A1-#A22 correspond to terminals #1-#22 on the breakout box.
Connecting the hands-free in the A-post terminals:
Terminals #C1-#C22 correspond to terminals #1-#22 on the breakout box.
Car phone handset terminals:
Terminals #D1-#D8 correspond to terminals #32-#39 on the breakout box.

The breakout box is designed to facilitate reading off the control module input and output signals when the control module is connected; and the cable and component resistance when the control module is disconnected. The use of a breakout box reduces the risk of accidental short-circuited cables and damage to the connector pins.