Rear Door Limiter: Service and Repair

Door stop rear side door, replacing

Note! The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removing the door stop for the rear side door




The window must be closed.
Remove the door panel. See(-2003) or(2004-).
Remove the soundproofing (1).




- one screw (2)
- two nuts (3).

Note! There is a cover over the screw (2) in some cars. This must be discarded andnotreplaced with a new one when replacing the door stop.




Twist the door stop (4) carefully to remove it through the opening.

Note! Use new locking fluid or new screw in the screwed joint when replacing the door stop.If using new locking fluid, remove the residue of the old locking fluid from the screw.

Installing the door stop for the rear side door





Install:
- the door stop
- the screw (2)
- the nuts (3)
- the soundproofing
- the door panel. See(-2003) or(2004-).