Private Telephone Subscription, Activation

Private telephone subscription, activation

Conditions for activating the subscription

In order for the customer's private subscription to be activated, the ESN (Electrical Serial Number) for the new phone module (PHM) must be connected to the customer's telephone number.

This is done by
- the customer's telephone is programmed in the new phone module (PHM)
- the customer contacts the operator to activate the subscription for the new phone module (PHM).

During this call, the customer must specify the ESN for the new phone module (PHM). Read off and note this on behalf of the customer when programming the telephone number.

Program the telephone number and read the ESN
To program the customer's telephone number and read off the ESN, carry out the following:
1. Key position I
2. Press the ON button if the carphone is switched off (the green LED must be lit on the phone module (PHM))
3. Press (9, 8, 7) on the carphone keypad
4. Press the right arrow button (]]) twice. The "Phone ESN" menu option now appears in the display in the driver information module (DIM)
5. Press the YES button. The ESN for the carphone now appears in the display and can be noted
6. Press the NO button
7. Press the right arrow button (]]) once. The "KRC" menu option will appear in the display
8. Press the right arrow button (]]) once. The "Phone MIN" menu option will appear in the display
9. Press the YES button
10. Erase any existing number by holding the CLR button in until the field is empty
11. Enter the noted telephone number. Check that the number is correct
12. Press the YES button
13. "Save setting?" will now appear in the display. Press the YES button again
14. Press the NO button to revert to the starting position for the carphone
15. Give the noted ESN to the customer. Also notify the customer that he or she must contact the operator to activate the subscription for the new phone module (PHM).