Checking Voice Messages

Checking voice messages

Checking the component
Ensure that the audio module is fault free by checking that there is sound from the driver's side speaker when, for example, radio mode is selected on the audio equipment.
Change the volume by selecting "change volume" in the RTI menus.

Hint: If there is no sound from the driver's side speaker, the fault is in the audio equipment. Fault-trace the audio equipment instead.

Is there sound coming from the driver's side speaker?

Yes - Checking the component

No - No Fault Found

-------------------------------------------------

Checking the component
Check the cable between the RTI control module terminal andthe audio unit terminal #E8. Check for a short-circuit to supply voltage. See Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault. Check for a short-circuit to ground. See Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault. Check for an open-circuit. See Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.

Other information:
- To access and replace the display screen, see Display screen / loudspeaker, RTI (road traffic information), replacing Service and Repair
- To access or replace the audio control module, see Radio cassette player, replacing Radio Cassette Player, Replacing
- For information about programming and replacing the road traffic information (RTI) control module, see Road traffic information module (RTI), replacing Service and Repair
- To connect the breakout box, see Connecting the breakout box to the Road Traffic Information (RTI) control module Connecting the Breakout Box to the Road Traffic Information (RTI) Control Module
- For information about RTI signals and connectors, see Signal specification, RTI Signal Specification
- For information about audio control module signals and connectors, see Signal specification, audio control module Signal Specification.









Was a fault detected?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------