Damper Motor, Air Distribution, Replacing

Damper motor, air distribution, replacing

Damper Motor Position Sensor recirculation

Removing - left-hand drive
- Ignition off.

Remove:
- the glove compartment. See Glove compartment, replacing Service and Repair
- the screws for the motor
- the motor
- the connector.

Removing - right-hand drive
- Ignition off.

Remove:
- the soundproofing panel. See Soundproofing panel, replacing Soundproofing Panel, Replacing
- the screws for the motor
- the motor
- the connector.

Installation
- Position the motor
- Turn the pulley so that the shaft journal on the motor goes in.
- Position the motor
- Install the screws for the motor
- Install the switch.

Left-hand drive
- Install the glove compartment. See Glove compartment, replacing Service and Repair

Right-hand drive
- Install the soundproofing panel. See Soundproofing panel, replacing Soundproofing Panel, Replacing