Front Seat, Driver's Seat, Front Seat

Lumbar support backrest cushion, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparations





Remove:
- the battery lead. See Battery, disconnecting Battery Disconnecting
- the front seat. See Removing power seats, tilting Removal and Replacement.

Removing lumbar support from the backrest cushion





Remove:
- the backrest cushion upholstery. See Upholstery back rest, replacing Upholstery Back Rest, Replacing
- the lumbar support knob.
Slacken off the tension in lumbar support.
Carefully remove the cover.
Pull the lumbar support knob straight out.

Remove:
- the 2 mounting screws on the side of the backrest
- the 6 hooks on both sides.
Detach the 2 mechanical cables on both sides.
Remove the lumbar support.

Installing the lumbar support in the backrest cushion

Install:
- the lumbar support
- the cables
- the hooks
- the mounting screws
- the backrest cushion upholstery. See Upholstery back rest, replacing Upholstery Back Rest, Replacing
- the lumbar support knob
- the cover.
Tension the lumbar support.

Install:
- the front seat. See Removing power seats, tilting Removal and Replacement
- the battery lead. See Battery, disconnecting Battery Disconnecting.