Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information REM-8D13

Condition
The rear electronic module (REM) checks the output signal to the stop lamps (LED).
Diagnostic trouble code (DTC) REM-8D13 is stored if the rear electronic module (REM) registers that the signal to the stop lamps (LED) is too high or that there is an open-circuit.
Diagnostic trouble code (DTC) REM-8D13 can be detected when the stop lamp is not activated.

Substitute value
None.

Possible source
- Open-circuit in the wiring for the stop lamps
- Short-circuit to supply voltage in the wiring to the stop lamps
- Defective stop lamp.

Fault symptom[s]
- The stop lamp does not light when the brake pedal is depressed
- The stop lamp lights constantly.