Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information REM-8D12

Condition
The rear electronic module (REM) checks the output signal to the stop lamps (LED).
Diagnostic trouble code (DTC) REM-8D12 is stored if the rear electronic module (REM) registers overheating or that the signal to the stop lamps (LED) is too low.
Diagnostic trouble code (DTC) REM-8D12 can be detected when the stop lamp is activated.

Substitute value
None.

Possible source
- Over heated
- Short-circuit to ground in the cable for the stop lamps
- Defective stop lamp.

Fault symptom[s]
- The stop lamp does not light when the brake pedal is depressed.