Interior Rear View Mirror For the Child Seat

Interior rear view mirror for the child seat


















INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The front page gives the date of this edition and the edition it replaces
- The second page shows the tools needed for the installation and the contents of the installation kit
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
- Cut out the text page in order to follow the illustrations and text at the same time.






Interior rear view mirror for the child seat

Note! 850/S40/V40/S70/V70(-00)/S80/V70(00-)/S60:Use 30 mm (1/13/16") studs.945/965/V90:Use 40 mm (1 37 64") studs.944/964/S90:Use 110 mm (4 21/64") studs.

Applies to all models:
- Pull the rear seat centre head restraint up
- Assemble the stud and the nut. Tighten the nut
- Install the studs for the mounting using the nuts.

Illustration A applies to the 944 / 964 / S90




- Screw the mounting into place as high up as possible on the mounting rod for the head restraint.

Illustration B applies to other models




- Install the shims (1) in the grooves in the mounting bracket
- Screw the mounting into place as high up as possible on the mounting rod for the head restraint.




- Screw the arm and the mirror together.




- Screw the mirror into the mounting
- Depress the head restraint
- Adjust the mirror so that the child seat can be seen in the mirror via the front rear view mirror.




- Position the mirror so that the driver can see the child in all reversed positions in the rear seat.