Canister Purge Control Valve: Service and Repair

Replacing the canister purge (CP) valve

Replacing the canister purge (CP) valve

Removing the canister purge (CP) valve
- Remove the intake manifold between the front cover plate and the air cleaner (ACL) housing.
- Disconnect the canister purge (CP) valve connectors.
- Pull off the valve from the bracket on the fan shroud.
- Mark up and pull off the hoses from the valve.

Installing a new canister purge (CP) valve
- Install the hoses according to the marking.
- Install the canister purge (CP) valve on the bracket on the fan shroud.
- Connect the canister purge (CP) valve connectors.
- Install the intake manifold between the front cover plate and air cleaner (ACL) housing.