Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-00E6

Condition
The Supplemental Restraint System Module (SRS) checks the signal in the control area network (CAN) bus.
Diagnostic trouble code (DTC) SRS-00E6 is stored if the Supplemental Restraint System Module (SRS) does not receive information on CAN from the central electronic module (CEM).
Diagnostic trouble code (DTC) SRS-00E6 can be diagnosed in ignition position II.

Substitute value
- None.

Possible source
- Open-circuit in the Controller area network (CAN) cable
- Incorrect function in the central electronic module (CEM).

Fault symptom[s]
- The SRS indicator lamp is lit.