Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information REM-8F13

Condition
The rear electrical module checks if the position sensor for the xenon lamp has been correctly calibrated.
Diagnostic trouble code (DTC) REM-8F13 is stored if the rear electronic module (REM) registers that the position sensor for the xenon lamp has not been correctly calibrated.
Diagnostic trouble code (DTC) REM-8F13 can be detected after calibration has been carried out.

Substitute value
None.

Possible source
- The position sensor for the Xenon lamp is incorrectly installed
- The calibration has been run with the vehicle under load or on an uneven surface.

Fault symptom[s]
- The road surface is not illuminated.